Building a physical prototype to test every design assumption is slow and expensive. Our mechanical simulation service lets you validate structural strength, thermal behavior, and motion performance digitally — before a single part is machined or printed.
What We Offer
- Finite Element Analysis (FEA) — stress, strain, and deformation analysis under real-world loads
- Thermal simulation — predicting heat distribution and thermal expansion effects
- Motion & kinematic simulation — verifying moving assemblies behave as intended
- Failure & fatigue analysis — identifying weak points before they become field failures
- Design optimization — refining geometry to reduce weight or material cost without sacrificing strength, including topology optimization
Who This Is For
- Teams designing load-bearing or safety-critical mechanical components
- Businesses wanting to reduce prototyping costs by catching design flaws early
- Anyone needing engineering validation data to support a design decision
Our Process
- Model preparation — using your existing CAD file or one we create via 3D Modeling
- Define loads & constraints — matching your real-world operating conditions
- Run simulation — analyzing stress, thermal, or motion behavior
- Report & recommendations — clear results with suggested design improvements if needed
Ready to Validate Your Design?
Contact us to discuss your component and the Mechanical simulation it requires to withstand those conditions.
Latest Posts
- Best Infill for Strength: Which Pattern and Percentage to Use
What is the best infill for strength? Test data shows walls and orientation matter more than pattern. Starting 3D print settings for each part type. - ArduPilot vs PX4: Which Drone Autopilot Should You Use?
ArduPilot vs PX4 compared: licence, supported vehicles, ground stations, tuning, ROS 2, and which open-source autopilot fits your drone, research, or product. - ASA vs ABS: Which Filament Should You Use?
ASA vs ABS compared with datasheet numbers: strength, toughness, heat, UV and weather resistance, how hard each is to print, and which to choose for your part.